How To Choose Hydraulic Bending Machine?

When the hydraulic bending machine is selected, the production cost will rise and the hydraulic bending machine can not expect to recover the cost. Therefore, there are several factors to be weighed at the time of decision.

The first important issues worth considering is that you want to produce parts, the point is to buy a table to complete the processing tasks and the shortest, the minimum machine tonnage. Careful consideration of material grades and maximum processing thickness and length.

Torsion: you also have to consider the possible deflection of this machine. Under the same load, the 10 foot machine worktable and the slider occurred 4 times as much as the 5 foot machine. That is to say, shorter machines need less pad adjustment to produce qualified parts. Reducing the adjustment of the pad and shortening the preparation time.

The bending radius of the part: then, the bending radius of the part must be focused on. When free bending is used, the bending radius is 0.156 times the opening distance of the die. In the process of free bending, the opening distance of the die should be 8 times the thickness of the metal material.

Degree: bending accuracy requirement is a factor that needs careful consideration. It is this factor that determines whether you need to consider a CNC bending machine or a hand controlled bending machine.

Mold: even if you have a mold full of shelves, do not think that these moulds are suitable for new machines. The wear of each die must be checked by measuring the length of the front to the shoulder of the punch and the length of the die shoulder.

Side length of bending parts: one factor that people often ignore is the bending side length of the material in front of the hydraulic bending machine.

Pay attention to the above points to choose the right、 quality machine.